Woodworking And More

Woodworking ideas, plans, reviews, tips and tricks, tools and much much more...

Multi-Tool Tricks for Woodworking

Get The Best Woodworking Projects & Plans for Everything You Can Imagine!

TedsWoodworking Plans and Projects

A multi-tool will deal with a variety of Do It Yourself jobs, however it's additionally handy for placing the ending up touches on wood plugs. Chris Marshall reveals you a quick technique for cutting them flush in a fraction of the moment it takes with hand devices. Right here's how.

Sign up for this network for new once a week video clip woodworking lessons, pointers as well as tricks:

Obtain a lot more TOTALLY FREE job strategies, expert tips as well as device updates in our weekly email e-newsletter. Subscribe right here:

Visit our website for the very best woodworking jobs and lessons:

TedsWoodworking Plans and Projects

Multi-Tool Tricks for Woodworking

A multi-tool will tackle a variety of DIY tasks, but it's also handy for putting the finishing touches on wood plugs. Chris Marshall shows you a quick trick for trimming them flush in a fraction of the time it takes with hand tools. Here's how.

Subscribe to this channel for new weekly video woodworking lessons, tips and tricks:
https://www.youtube.com/user/WoodworkersJournal

Get more FREE project plans, expert tips and tool updates in our weekly email newsletter. Subscribe here:
http://www.woodworkersjournal.com/welcome/ezine-youtube/

Visit our website for the best woodworking projects and lessons:
http://www.woodworkersjournal.com/

Use Your Skills and Start Your Own Woodworking Business Now! Click Below!

Wood Profits Banner

27 Comments

Add a Comment
  1. he talks funny like a info merical

    1. +lucy l stfu you look like a orange

    2. he talks like Owen Wilson!! lol

    3. It is an infomercial.Did you not notice the name showing on the bag and the
      way he talks.

  2. Μάκης Γεωργακάκης

    why not wtih a saw and chisel?

  3. Where the hell is the trick? What you showed is not a trick, thats just one
    of the features of the tool..

  4. thanks for the commercial

  5. طالب الرحمه

    hello Im from Arab pla u can send me one like this thx

    1. How about some c4طالب الرحمه

  6. I replace some hardwood floor stripes and I was wondering if I can sand
    finish floor to blend unfinanced wood with this multi sanding pads?? Whats
    your opinion ?

  7. when he was doing the sanding, the video was edited for every plug to make
    it look like it only took a second. Hate misleading reviews!!

  8. Thanks, nice demonstration but which attachment do you use to scrape off
    old paint? 2:54 and why is it called multi-tool if it only has 3 different
    attachments, I was hoping for more

  9. I have a Bosh MX30 (it rocks) and I am currently using it to remove 20 year
    old paint and gunk from a wooden patio. You can use several different tools
    for this. Because there is old gunk (sap + primer) under the paint that
    loads up the paint removal sandpaper in a few minutes, I went a little more
    aggressive. I could use a scraper blade, but it doesn’t work fast enough to
    for me. Instead, I am using a carbide delta rasp, originally meant for
    removing thinset, on face grain, and a hardwood saw blade on the side. The
    hardwood saw blade has fine teeth and works great here as a more aggressive
    scraper, parallel to the wood. The carbide rasp is very aggressive. Very.
    Be prepared for quick material removal and don’t use it on any veneer.
    Since the rasp works much like a rock solid 40 sandpaper, there is some
    sanding to do after, but by then I am down to bare wood. I used the same
    multitool for it all, even taking a break to sand my front door before
    painting. Yay multitools!

  10. @goodcat: it’s not to mislead. Few people can watch sanding for that long
    without falling asleep. Granted, they could have just sped up the video.

  11. isn’t this what a japanese saw is for?

  12. #Kar Eyber I have a Bosh MX30 (it rocks) and I am currently using it to
    remove 20 year old paint and gunk from a wooden patio. You can use several
    different tools for this. Because there is old gunk (sap + primer) under
    the paint that loads up the paint removal sandpaper in a few minutes, I
    went a little more aggressive. I could use a scraper blade, but it doesn’t
    work fast enough to for me. Instead, I am using a carbide delta rasp,
    originally meant for removing thinset, on face grain, and a hardwood saw
    blade on the side. The hardwood saw blade has fine teeth and works great
    here as a more aggressive scraper, parallel to the wood. The carbide rasp
    is very aggressive. Very. Be prepared for quick material removal and don’t
    use it on any veneer. Since the rasp works much like a rock solid 40
    sandpaper, there is some sanding to do after, but by then I am down to bare
    wood. I used the same multitool for it all, even taking a break to sand my
    front door before painting. Yay multitools! @Μάκης Γεωργακάκης

    1. #Handyjack this just sounds like an advert @Μάκης Γεωργακάκης

  13. Ahh so this was just an ad… OK, pity there is no disclaimer at the start
    I could have saved 3 mins

  14. another detailed video that equals just common sense

  15. there’s a lotta spam going on in this comment section

    1. what do you call spam

  16. i just use a Japanese flexible handsaw.Fast and no marring,no sanding By
    the time you get the saw out explain it make the shim I could have 24 glued
    in and cut.

  17. that multitool in its manual talks about grounding yourself. how do i do
    that? can i be barefooted on a carpeted floor and use it?

  18. if that tool is that fast why did you edit video? If you had the tool in
    shop for many years, why were using a new tool?

  19. Really disgusting and shameless the way this is portrayed as helpful
    advice, but is really nothing but a 3 minute ad. If I come across more of
    these I don’t think I’ll stay subscribed.

  20. Certain comments, sour grapes, i would say…..when select to watch, ideal
    time frame is not more than 3 minutes….thx man, Just wanna ask, this
    tool, if there can be a brush, nylon or steel, to clean tile grout, it will
    be fantastic – any such available…thx again.

Leave a Reply

Your email address will not be published. Required fields are marked *

Woodworking And More © 2017 - Woodworking ideas, plans, reviews, tips and tricks, tools and much much more...