Woodworking And More

Woodworking ideas, plans, reviews, tips and tricks, tools and much much more...

For Less Than $ 100, He Crafted A Beautiful Table Out Of Something So Unexpected

Get The Best Woodworking Projects & Plans for Everything You Can Imagine!

TedsWoodworking Plans and Projects

Opportunity merely knocks once.

That old-time proverb demonstrates more than true-blue in the field covered by DIY designs.

As a do-it-yourselfer, you may simply come across that perfect table, door…or even a bathtub once in a lifetime. If the moment’s claim, you better impres while the iron’s hot. But now that I’ve crammed so many languages and proverbs into so few positions of textbook, let’s get to the point close at hand.

Imgur user treeshugmeback just so happened to be at the best place at the right time where reference is stumbled across an old-fashioned oak door at a church’s yard sale. Wait until you see how he transformed the door into the perfect table to sit at and break bread.

Here’s a DIY Tip: Pay close attention to firms with a fixing van or contractor sitting right. Probabilities are, there might be some good DIY information out on the curbside in a few day’s time.

Lucky for treeshugmeback, the church that was impounding the yard sale had just had their doorways superseded, and the old ones were for sale.

googletag.cmd.push( part() googletag.display( ‘VN_PG_DCBM_BTF’ ); );

He cut down the door to sit six and then sanded the edges. Treeshugmeback too removed the varnish and stain until merely the natural oak demo through.

Then it was time to stain the door to his sought-after color — treeshugmeback selected dark walnut to antagonize the yellow-bellied hue of the wood.

After two coats of discolour, the builder polyurethaned the top and posterior of the door for additional protection.

He fastened a frame to the door and voila — he had a table! But he wasn’t done just yet…

googletag.cmd.push( purpose() googletag.display( ‘VN_PG_DCI1_BTF’ ); );

To even out the immerses in the door, this crafter employed bottle caps to fill the gaps.

He obtained more than 1,600 bottle caps and laid out a design in a stained-glass pattern.

Each bottle cap had to be glued down by hand. To fill in the remaining gaps, he exploited an epoxy resin.

The table was finished, but the resin still needed to dry.

After eight hours of sitting, the statement article was finally ready for its firstly supper.

They suggest we devour with our eyes. If that’s the event, then no matter what’s on this table, I’ll be ready to dig in!

Read more:

Use Your Skills and Start Your Own Woodworking Business Now! Click Below!

Wood Profits Banner

Leave a Reply

Your email address will not be published. Required fields are marked *

Woodworking And More © 2017 - Woodworking ideas, plans, reviews, tips and tricks, tools and much much more...